|
Resin infusion system EPR 04908 with hardener EPH 04908 |
||||||||
|
Mix ratio EPH 04908 (by weight) |
||||||||
| 100 | 30,0 | Total | 100 | 30,0 | Total | 100 | 30,0 | Total |
| 10 | 3,0 | 13,0 | 155 | 46,5 | 201,5 | 300 | 90,0 | 390,0 |
| 15 | 4,5 | 19,5 | 160 | 48,0 | 208,0 | 305 | 91,5 | 396,5 |
| 20 | 6,0 | 26,0 | 165 | 49,5 | 214,5 | 310 | 93,0 | 403,0 |
| 25 | 7,5 | 32,5 | 170 | 51,0 | 221,0 | 315 | 94,5 | 409,5 |
| 30 | 9,0 | 39,0 | 175 | 52,5 | 227,5 | 320 | 96,0 | 416,0 |
| 35 | 10,5 | 45,5 | 180 | 54,0 | 234,0 | 325 | 97,5 | 422,5 |
| 40 | 12,0 | 52,0 | 185 | 55,5 | 240,5 | 330 | 99,0 | 429,0 |
| 45 | 13,5 | 58,5 | 190 | 57,0 | 247,0 | 335 | 100,5 | 435,5 |
| 50 | 15,0 | 65,0 | 195 | 58,5 | 253,5 | 340 | 102,0 | 442,0 |
| 55 | 16,5 | 71,5 | 200 | 60,0 | 260,0 | 345 | 103,5 | 448,5 |
| 60 | 18,0 | 78,0 | 205 | 61,5 | 266,5 | 350 | 105,0 | 455,0 |
| 65 | 19,5 | 84,5 | 210 | 63,0 | 273,0 | 355 | 106,5 | 461,5 |
| 70 | 21,0 | 91,0 | 215 | 64,5 | 279,5 | 360 | 108,0 | 468,0 |
| 75 | 22,5 | 97,5 | 220 | 66,0 | 286,0 | 365 | 109,5 | 474,5 |
| 80 | 24,0 | 104,0 | 225 | 67,5 | 292,5 | 370 | 111,0 | 481,0 |
| 85 | 25,5 | 110,5 | 230 | 69,0 | 299,0 | 375 | 112,5 | 487,5 |
| 90 | 27,0 | 117,0 | 235 | 70,5 | 305,5 | 380 | 114,0 | 494,0 |
| 95 | 28,5 | 123,5 | 240 | 72,0 | 312,0 | 385 | 115,5 | 500,5 |
| 100 | 30,0 | 130,0 | 245 | 73,5 | 318,5 | 390 | 117,0 | 507,0 |
| 105 | 31,5 | 136,5 | 250 | 75,0 | 325,0 | 395 | 118,5 | 513,5 |
| 110 | 33,0 | 143,0 | 255 | 76,5 | 331,5 | 400 | 120,0 | 520,0 |
| 115 | 34,5 | 149,5 | 260 | 78,0 | 338,0 | 405 | 121,5 | 526,5 |
| 120 | 36,0 | 156,0 | 265 | 79,5 | 344,5 | 410 | 123,0 | 533,0 |
| 125 | 37,5 | 162,5 | 270 | 81,0 | 351,0 | 415 | 124,5 | 539,5 |
| 130 | 39,0 | 169,0 | 275 | 82,5 | 357,5 | 420 | 126,0 | 546,0 |
| 135 | 40,5 | 175,5 | 280 | 84,0 | 364,0 | 425 | 127,5 | 552,5 |
| 140 | 42,0 | 182,0 | 285 | 85,5 | 370,5 | 430 | 129,0 | 559,0 |
| 145 | 43,5 | 188,5 | 290 | 87,0 | 377,0 | 435 | 130,5 | 565,5 |
| 150 | 45,0 | 195,0 | 295 | 88,5 | 383,5 | 440 | 132,0 | 572,0 |
|
Resin infusion system EPR 04908 with hardener EPH 04908 |
||||||||
| Gel Time 250 - 350 min., in combination with EPH 101 the gel time is 20 - 250 min. | ||||||||
| Low viscosity 120 mPa.s | ||||||||
| Tg 82°C | ||||||||
| This system needs postcuring | ||||||||
| Basic Resin System EPR 357 with hardener EPH 545 | ||||||||
| Mix ratio EPH 545 (by weight) | ||||||||
| 100 | 55,0 | Total | 100 | 55,0 | Total | 100,0 | 55,0 | Total |
| 10 | 5,5 | 15,5 | 155 | 85,3 | 240,3 | 300,0 | 165,0 | 465,0 |
| 15 | 8,3 | 23,3 | 160 | 88,0 | 248,0 | 305,0 | 167,8 | 472,8 |
| 20 | 11,0 | 31,0 | 165 | 90,8 | 255,8 | 310,0 | 170,5 | 480,5 |
| 25 | 13,8 | 38,8 | 170 | 93,5 | 263,5 | 315,0 | 173,3 | 488,3 |
| 30 | 16,5 | 46,5 | 175 | 96,3 | 271,3 | 320,0 | 176,0 | 496,0 |
| 35 | 19,3 | 54,3 | 180 | 99,0 | 279,0 | 325,0 | 178,8 | 503,8 |
| 40 | 22,0 | 62,0 | 185 | 101,8 | 286,8 | 330,0 | 181,5 | 511,5 |
| 45 | 24,8 | 69,8 | 190 | 104,5 | 294,5 | 335,0 | 184,3 | 519,3 |
| 50 | 27,5 | 77,5 | 195 | 107,3 | 302,3 | 340,0 | 187,0 | 527,0 |
| 55 | 30,3 | 85,3 | 200 | 110,0 | 310,0 | 345,0 | 189,8 | 534,8 |
| 60 | 33,0 | 93,0 | 205 | 112,8 | 317,8 | 350,0 | 192,5 | 542,5 |
| 65 | 35,8 | 100,8 | 210 | 115,5 | 325,5 | 355,0 | 195,3 | 550,3 |
| 70 | 38,5 | 108,5 | 215 | 118,3 | 333,3 | 360,0 | 198,0 | 558,0 |
| 75 | 41,3 | 116,3 | 220 | 121,0 | 341,0 | 365,0 | 200,8 | 565,8 |
| 80 | 44,0 | 124,0 | 225 | 123,8 | 348,8 | 370,0 | 203,5 | 573,5 |
| 85 | 46,8 | 131,8 | 230 | 126,5 | 356,5 | 375,0 | 206,3 | 581,3 |
| 90 | 49,5 | 139,5 | 235 | 129,3 | 364,3 | 380,0 | 209,0 | 589,0 |
| 95 | 52,3 | 147,3 | 240 | 132,0 | 372,0 | 385,0 | 211,8 | 596,8 |
| 100 | 55,0 | 155,0 | 245 | 134,8 | 379,8 | 390,0 | 214,5 | 604,5 |
| 105 | 57,8 | 162,8 | 250 | 137,5 | 387,5 | 395,0 | 217,3 | 612,3 |
| 110 | 60,5 | 170,5 | 255 | 140,3 | 395,3 | 400,0 | 220,0 | 620,0 |
| 115 | 63,3 | 178,3 | 260 | 143,0 | 403,0 | 405,0 | 222,8 | 627,8 |
| 120 | 66,0 | 186,0 | 265 | 145,8 | 410,8 | 410,0 | 225,5 | 635,5 |
| 125 | 68,8 | 193,8 | 270 | 148,5 | 418,5 | 415,0 | 228,3 | 643,3 |
| 130 | 71,5 | 201,5 | 275 | 151,3 | 426,3 | 420,0 | 231,0 | 651,0 |
| 135 | 74,3 | 209,3 | 280 | 154,0 | 434,0 | 425,0 | 233,8 | 658,8 |
| 140 | 77,0 | 217,0 | 285 | 156,8 | 441,8 | 430,0 | 236,5 | 666,5 |
| 145 | 79,8 | 224,8 | 290 | 159,5 | 449,5 | 435,0 | 239,3 | 674,3 |
| 150 | 82,5 | 232,5 | 295 | 162,3 | 457,3 | 440,0 | 242,0 | 682,0 |
| Basic resin system, fillets, laminating and fairing compounds | ||||||||
| Gel Time 33 min. | ||||||||
| Tg 60 °C | ||||||||
| EPR 357 with EPH 04908 for laminating carbon (needs postcuring) | ||||||||